AKRUS® Uralkid (primer-enamel)
For metal structures
- Color: It is tinted according to the RAL standard
- Type: Primer-enamel, external
One-component quick-drying anticorrosive primer-enamel based on a film-forming agent, which includes a complex of synthetic resins. A single-pack multipurpose coating comprising a matte urethane-alkyd resin. The coating is weather-resistant and exhibits rapid drying properties, thereby reducing the time required for commissioning. The coating is applied and dried at a temperature of minus 30°C. The coating can be repaired and used as a repair coating.
AKRUS® Long primer-enamel (single-layer)
For tanks
- Color: Light green, dark gray (antistatic), the shade is not standardized
- Type: Primer-enamel, internal
The base of the primer is a suspension of pigments and fillers in epoxy resins. The amine-type hardener is a chemical compound that is used to harden the epoxy resin.
AKRUS® Slick
Anti-icing coatings
- Color: clear, white
- Type: Enamel, external
The coating is a two-component composition comprising a base and a hardener. The fundamental composition of the coating is a solution of specialised resins and functional additives. The hardener is a composite material. The coating has been designed for the purpose of providing anticorrosive protection to metal surfaces that possess special properties (anti-icing) in order to reduce snow loads and to prevent the formation of ice, anti-freezing, and freezing masses.
The coating can be employed as an anti-vandal coating since it is resistant to scratching and can be readily cleaned when dirt and unwanted marks are present.
AKRUS® Epozinc (primer)
For metal structures
- Color: Gray
- Type: Primer, external
The material is a two-component system comprising a suspension of zinc dust and fillers in an epoxy resin solution.
AKRUS® Long (enamel)
For tanks
- Color: Light green color, dark gray (antistatic), and the shade is not standardized
- Type: Primer-enamel, internal
The base of the primer is a suspension of pigments and fillers in epoxy resins. The amine-type hardener is used to harden the epoxy resin.
AKRUS® Uralkid Fest (primer-enamel)
For metal structures
- Color: Light gray, red-brown
- Type: Primer, external
Single-pack material, anti-corrosion urethane-alkyd primer. It has a high drying rate. The use of the primer provides high adhesion, durability, and anti-corrosion resistance of the paint coating system, mineral oil, detergents and weather resistance
AKRUS® Therma (primer-enamel)
Heat-resistant coatings
- Color: Silver, white, gray, black. Other colors must be agreed with the manufacturer
- Type: Primer-enamel, external
The material is a one-component system based on polyphenylsiloxane (silicone) resin and acrylate.
ACRUS® Strong
Anti-corrosion coatings
- Color: Red-brown, gray, tinting is possible
- Type: Primer-enamel, external
The material is a two-component epoxy. The coating is characterised by a high degree of filler content and exhibits resistance to abrasion. Furthermore, it has a low volatile organic compounds content.
AKRUS® Epox C (AL) (primer-enamel)
Anti-corrosion coatings
- Color: Yellow
- Type: Primer-enamel, external
The material is a two-component epoxy resin system. The coating exhibits high anti-corrosion properties and resistance to water, petrol, and oils.